Â
Model |
Unit |
CNC450 |
Dimension of working tank |
mm |
1000×1200×400 |
Workable dimension |
mm |
750×420 |
Table travel (X,Y axis) |
mm |
350×450 |
Z axis travel |
mm |
200 |
Z travel of machine head |
mm |
200 |
Max and min height of spindle end to worktable |
mm |
500/200 |
Dimension of oil tank |
mm |
1000×1200×400 |
Max.weight of electrode |
kg |
50 |
Max.loading of worktable |
kg |
600 |
Weight of machine body |
kg |
1400 |
Dimension of machine |
mm |
2400×1450×2200 |
Specification of cabinet : TAIWAN Original C-TEK cabinet |
||
Control model, controlled axis |
CNC closed-up control, X,Y,Z 3-axis linkage. |
|
X,Y,Z axis min. setting dimension |
0.005mm |
|
Max.setting size |
9999.995mm |
|
Coordinate system |
INC (INCREMENT), ABS (ABSOLUTE) |
|
Control system |
Industrial PC |
|
Feed Ratio |
0.005mm*1,*5,*10 |
|
Program storage capacity |
More than 10000 groups |
|
Max. machining current |
50A 75A 100A |
|
Input power |
4.5KVA 6 10 |
|
Max. material removal rate |
360mm²/min 560 700 |
|
Electricity wear |
<0.2% |
|
Best surface roughness |
0.2μm |
|
Machinig setting groups |
1 |
|
Machining setting segments |
10 |
|
Program processing model |
Up processing, down processing, side processing. |
|
Orbital |
Available (but not suggest) |
|
Multiple position of machining |
1pc |
Notes: standard equiped with 50A power cabinet, 75A, 100A cabinets are optional, price are different, pls kindly noted.
Â
·Manual feed rate override control (MFRO-MFR3): allows manual control of the feed rate to avoid collisions.
·Sensor input (ST) function
·Various positioning modes available for the feed
·Half-stroke movement function
·Limit movement function
·Return to start of machining function
· G code programming
·Automatic positioning function
·Discharge position finding (positioning) function
·Neural network automatic machining function (1, 2, 3 electrode)
Automatic calculation of machining parameters
·LORAN machining function
·Orbiting (empty run) function
·Automatic lift control (AJC) function
·Automatic arc voltage control and virtual electrode cleaning function
·Multi-hole machining function (with fixed positioning, grid l, grid ll, circular)
·User program machining function (hard disk/floppy disk, RS-232C serial communication)
·Manual machining function (entering machining part number and quantity)
·Mask simulation of machining parts and machining function
·Auxiliary machining function
·Thread machining function
·System-generated NC program and automatic machining function (AUTO)
·Direct operation functions such as electric exchange, electric offset, and MT
·Straight, circular arc, spiral, and bamboo insertion functions (available in our company)
·Discharge circle display function
·Machining efficiency display function
··Machining time counting function
·Metric/imperial unit switching function
·Self-diagnosis, assistance, and information prompts
·Timing machining function
·Pause and resume machining function
·Power failure self-recovery function
·LCD display
Â
Â
Â
Â
Â
Â
Â
Â
Â
http://www.inchsparking.com/